Wuxi Flyt New Energy Technology Co.,Ltd.

iphepha_ibhena

S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator

S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator Umfanekiso okhoyo
  • S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator
  • S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator
  • S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator
  • S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator
  • S2 200w 300w 12v 24v 48v eHorizontal Wind Turbine Generator

Inkcazelo emfutshane:

1.Isantya sokuqala esisezantsi, iiblade ezi-6, ukusetyenziswa kwamandla omoya ophezulu
2.Ufakelo olulula, ityhubhu okanye uqhagamshelo lweflange ngokuzikhethela
3.Iiblayidi ezisebenzisa ubugcisa obutsha bokubumba inaliti echanekileyo, ehambelana nobume obuphuculweyo be-aerodynamic kunye nesakhiwo, esiphucula ukusetyenziswa kwamandla omoya kunye nemveliso yonyaka.
I-4.Umzimba wokuphosa i-aluminium alloy, kunye neebheringi ezi-2 ezijikelezayo, ziyenza iphile kumoya onamandla kwaye ibaleke ngokukhuselekileyo.
5.Ilungelo elilodwa lomenzi we-ac generator ene-stator ekhethekileyo, inciphisa ngokufanelekileyo i-torque, ifanise kakuhle ivili lomoya kunye nejenereyitha, kwaye uqinisekise ukusebenza kwenkqubo yonke.
I-6.Controller, i-inverter inokudityaniswa ngokuhambelana neemfuno ezithile zabathengi


  • :

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Ividiyo

    Iimbonakalo

    1.Isantya sokuqala esisezantsi, iiblade ezi-6, ukusetyenziswa kwamandla omoya ophezulu
    2.Ufakelo olulula, ityhubhu okanye uqhagamshelo lweflange ngokuzikhethela
    3.Iiblayidi ezisebenzisa ubugcisa obutsha bokubumba inaliti echanekileyo, ehambelana nobume obuphuculweyo be-aerodynamic kunye nesakhiwo, esiphucula ukusetyenziswa kwamandla omoya kunye nemveliso yonyaka.
    I-4.Umzimba wokuphosa i-aluminium alloy, kunye neebheringi ezi-2 ezijikelezayo, ziyenza iphile kumoya onamandla kwaye ibaleke ngokukhuselekileyo.
    5.Ilungelo elilodwa lomenzi we-ac generator ene-stator ekhethekileyo, inciphisa ngokufanelekileyo i-torque, ifanise kakuhle ivili lomoya kunye nejenereyitha, kwaye uqinisekise ukusebenza kwenkqubo yonke.
    I-6.Controller, i-inverter inokudityaniswa ngokuhambelana neemfuno ezithile zabathengi

    Uluhlu lwepakethe:
    I-1.i-injini yomoya iseti e-1(i-hub, umsila, i-3/5 iiblades, i-generator, i-hood, iibholiti kunye namandongomane).
    2. isilawuli somoya 1 isiqwenga.
    3. isixhobo sokufakela i-1 iseti.
    4.flange 1 iqhekeza.

    Iinkcukacha

    Umzekelo S2-200 S2-300
    Amandla alinganisiweyo(w) 200w 300w
    Amandla maKhulu(w) 220w 320w
    Ulinganiso lombane (v) 12/24V 12/24V
    Ubude bamagqabi (mm) 530/580 530/580
    Ubunzima obuphezulu (kg) 6 6.2
    Idayamitha yevili lomoya(m) 1.1 1.1
    Inombolo yeeblades 3/5 3/5
    Isantya somoya sokuqalisa 1.3m/s
    Ukusinda isantya somoya 40m/s
    ijenereyitha 3 isigaba esisigxina umazibuthe synchronous generator
    Ubomi Benkonzo Ngaphezu kweminyaka engama-20
    Ukuthwala HRB okanye iodolo yakho
    Iiblades izinto inayiloni
    Izinto zeShell inayiloni
    Izinto zeMagnet eziZisigxina Umhlaba onqabileyo NdFeB
    Inkqubo yokulawula Imagnethi yombane
    Ukuthambisa Igrisi yokuthambisa
    Ubushushu bokusebenza -40 ukuya kuma-80

    IiMfuno zeNdibano

    1. Phambi kokuhlanganiswa kwejenereyitha yomoya okanye kwinkqubo yokugcinwa, nceda uqiniseke ukuba ufunda incwadi yabasebenzisi kuqala.

    2. Nceda ungafaki iiinjini zomoya ngeentsuku zemvula okanye xa isikali somoya sikwiNqanaba lesi-3 okanye ngaphezulu.

    3. Emva kokuvula ipakethe, kucetyiswa ukuba ujikeleze ngokukhawuleza iintambo ezintathu zee-injini zomoya(iindawo zobhedu eziveziweyo kufuneka zijijwe kunye).

    4. Ngaphambi kokufakwa kwe-injini yomoya, umbane wombane kufuneka ulungiswe.Unokwenza amalungiselelo amaziko ngokwemigangatho yelizwe, okanye unokuzilungiselela ngokwemeko yendawo yendawo kunye nemeko yomhlaba.

    5.Xa udibanisa i-injini yomoya, Onke amalungu kufuneka abotshelelwe ngezibophelelo ezichazwe kwitafile.1.

    5.Xa udibanisa i-injini yomoya, Onke amalungu kufuneka abotshelelwe ngezibophelelo ezichazwe kwitheyibhile2.

    6. Phambi kodibaniso phakathi kweflange yeinjini yomoya kunye neflange yenqaba, nceda uqhagamshele iintambo ezintathu zeinjini yomoya kwiindlela ezintathu ezikhokelela kwinqaba ngokufanelekileyo.Xa usebenzisa indlela yehenjisi, iperi nganye yeecingo kufuneka ingabi ngaphantsi kwe-30mm ubude kwaye isongelwe ngeteyiphu yelaphu yeAcetate kumaleko amathathu, emva koko igqunywe ngetyhubhu yepeyinti yeglasi esontiweyo.Ngale ndlela, qhagamshela izibini ezintathu zeengcingo (ingqalelo: indawo edibeneyo yeengcingo ayinakuthwala ubunzima benqaba ekhokelela ngokuthe ngqo, ngoko ke iingcingo eziyi-100mm ukuya ezantsi ukusuka kwindawo edibeneyo kufuneka zisongelwe ngeteyiphu yokuncamathelisa kwaye emva koko zihlohlwe kumbhobho wentsimbi. Emva koko, i-wind turbine flange kunye ne-tower flange inokudityaniswa.

    7.Phambi kokuba uphakamise ii-injini zomoya, isiphelo (ekufuneka sidityaniswe nesilawuli) selothe yenqaba kufuneka sisikwe umaleko wokugquma umgquba kangange-10mm okanye njalo.Emva koko ujije iintambo ezintathu eziveziweyo (isekethi edubulayo) kunye.

    8. Ngethuba lofakelo, akuvumelekanga ukujikeleza i-rotor blades ngokumalunga (iziphelo ze-wind turbine zikhokelela okanye i-tower lead i-short-circuited kulo mzuzu).Kuphela emva kokuba konke ukufakela kunye noviwo lugqityiwe kwaye ukhuseleko lwabasebenzi be-erection luqinisekisiwe, kuvunyelwe ukukhupha iintambo ezimfutshane ezijikelezayo kwaye emva koko udibanise nomlawuli kunye nebhetri ngaphambi kokuba usebenze.

  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO